Lexmark X422 - Page 209

Menus
209
Using the MFP control panel and menus
NetWare
Network/USB – NetWare
Menu item Purpose Values and descriptions
View Login Name Specifies the login name for
NetWare which is the same as
the adapter name.
View only. Set this from the Web page.
View Print Mode Specifies the print server for
the remote MFP.
View only. Set this from the Web page.
View Network
Number
Specifies the NetWare number
which is part of the hardware
address.
View only. Set this from the Web page.
Activate To turn the NetWare protocol
on (activated) or off
(de-activated).
On*
Off
Ethernet 802.2 Specifies the Internetwork
Packet Exchange (IPX) frame
type, which is NetWare
Protocol. Defines the frame
types that the adapter can use
to initiate conversations.
On*
Off
Ethernet 802.3 Specifies the Internetwork
Packet Exchange (IPX) frame
type, which is Transfer
Protocol. Defines the frame
types that the adapter can use
to initiate conversations.
On*
Off
Ethernet Type II Defines the cabling. An
Ethernet Type II cable is used
as the frame type.
On*
Off
Ethernet SNAP Subnet Access Point (SNAP)
allows for managing devices
on the network.
On*
Off
Packet Burst Specifies a mode for rapid
data transmission.
On
Off*
NSQ/GSQ Mode Nearest Service Queue (NSQ)
searches with a limited scope
only for the file servers.
General Service Queue (GSQ)
searches for all services and
file servers.
On
Off*