Menus
210
Using the MFP control panel and menus
AppleTalk
LexLink
Network/USB – AppleTalk
Menu item Purpose Values and descriptions
View Name Names the devices.
The setting is used
to advertise the
print services.
Macintosh uses
names instead of a
string of numbers.
View only. Set this from the Web page.
View Address Allows you to see
the address.
View only. Set this from the Web page.
Activate To turn the
AppleTalk protocol
on (activated) or off
(de-activated).
On*
Off
Set Zone Specifies the
setting for the
network zone.
*
List of zones from the
Network Default is the
default zone of the
network.
* is the default if no other value is
set. * acts as a wildcard for
everything on the network.
Network/USB – LexLink
Menu item Purpose Values and descriptions
View Nickname Lets you view the LexLink adapter
nickname.
View only. Set this from the Web page.
Activate To turn the LexLink protocol either on
(activated) or off (de-activated).
On*
Off
To Next Page
Loading...
