Lexmark X46X Series Service Manual

Diagnostic aids 3-5
7014-xxx
To change the value of this setting:
1. Touch Panel Menus from the Configuration Menu. [setting's current value] appears on the touch-
screen.
2. Touch or to scroll through the setting's other possible values.
3. Touch Back to cancel and return to the Configuration Menu.
4. Touch Submit to save the change.
PPDS Emulation
The value of the PPDS Emulation menu item determines if a device can recognize and use the PPDS
datastream. The current value of this setting appears in parentheses to the right of the setting on the
Configuration Menu screen.
The following table indicates how the value of this setting affects the user default value for the SmartSwitch and
Printer Language settings:
To change the value of this setting:
1. Touch PPDS Emulation from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's possible values.
3. Touch Back to cancel and return to the Configuration Menu.
4. Touch Submit to save the change.
Download Emuls
This setting enables you to disable a Downloadable emulator (DLE) that is installed on the MFP. The setting for
this menu settng is disabled.
Note: The DLE is re-enabled automatically after two PORs.
To change the value of this setting:
1. Touch Download Emuls from the Configuration Menu. [setting's current value] appears on the
touch-screen.
2. Touch or to scroll through the setting's possible values.
3. Touch Back to cancel and return to the Configuration Menu.
4. Touch Submit to save the change.
Value of
PPDS
Emulation
setting
Resulting value of
SmartSwitch setting
(all ports)
Resulting value for Printer Language settings
Activate Off PPDS Emulation
Note: You can still switch languages on the operator panel or through
the PJL ENTER LANGUAGE command.
Deactivate On Printer's factory default value

Lexmark X46X Series Specifications

General

Brand	Lexmark
Model	X46X Series
Category	Printer
Language	English