3-16 Service Manual
7014-xxx
Clear Custom Status
No values exist for this operation. Pressing initiates this operation.
Touch to select Clear Custom Status from the Configuration Menu.
Note: Executing this operation erases any strings that have been defined by the user for the default or
alternate custom messages.
USB Speed
USB PnP
This setting is used to improve the MFP’s compatibility with the host PC.
Note: Some PCs contain chipsets that may be incompatible with this MFP.
To change this setting:
1. Touch to select USB PnP from the Configuration Menu.
2. Touch or to change the value. The values are 1 (default) and 2.
3. Touch Submit to save the change.
Touch Back to cancel and return to the Configuration Menu.
Exit Configuration Menu (Exit Config Menu)
Press to exit the Configuration menu. The printer performs a POR and restarts in normal mode.
To Next Page
Loading...
Need help?
General
