2-96 Service Manual
7526
292.00—Scanner ADF cover open jam service check
4
1. Remove the ADF motor side cover. See
“ADF motor side cover removal” on
page 4-232.
2. Remove the ADF front side cover. See
“ADF front side cover removal” on
page 4-230 and
Is the cable (A) connected correctly?
Replace the front case
assembly. See “ADF case
assembly removal” on
page 4-251.
Reseat the cable.
Step Questions / actions Yes No
1 Open the ADF cover. Check the ADF cover
sensor flag (A) for damage.
Is the flag damaged?
Replace the flag. See
“ADF closed cover flag
removal” on page 4-254.
Go to step 2.
2
Check the ADF top cover latch (A).
Are the latches damaged?
Replace the ADF front
cover assembly. See
“Scanner front cover
removal” on page 4-243
Go to step 3.
Step Questions / actions Yes No
To Next Page
Loading...
