EasyManua.ls Logo

Lexmark X734DE - Printer and Scanner Specifications

Lexmark X734DE
626 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-2 Service Manual
7526
Go Back
Previous
Next
Media options
The Lexmark X73xde MFP support 550-sheet drawers, special media drawers, and the 2000-sheet high-
capacity input tray. The Lexmark X73xde MFP support up to four input options.
The options can include any combination of 550 sheet drawers and 550 sheet Specialty Media Drawers, with a
maximum of one 2000 sheet drawer (always at the lowest position.) A caster base is required with some
configurations. Including the base machine capacity of 650 sheets, the MFP supports up to 3,200 sheets. The
Lexmark C73xde options are compatible with the Lexmark X73xde MFP, but not with any other Lexmark
printers. No other options are supported by the X73xde.
The media options include:
550-Sheet Drawer—This optional input source installs beneath the printer, and it holds approximately 550
sheets of (20 lb.) paper.
High Capacity Input Tray—This optional input source installs beneath the printer, and it holds
approximately 2000 sheets of (20 lb.) paper.
Specialty Media Drawer—This optional input source installs beneath the printer, and it holds
approximately 550 sheets of (20 lb.) paper, or 85 standard envelopes.
Memory options
Additional memory card—The memory options for the X73xde printers are 200 pin DDR2, SODIMM, and
they are available at 256MB, 512MB, and 1GB sizes.
Flash memory card—Flash Memory cards are available in 256MB.
Hard disk—If larger storage is required, an optional hard disk is available.
Printer and scanner specifications
Dimensions
The following table contains the dimensions and weight for each of the respective printer models. This does not
include packaging.
Height Width Depth Weight
Lexmark X734de, X736de, X738de
Basic printer (cartridges only) 787 mm
(31 in)
546 mm
(21.5 in)
622 mm
(24.5 in)
44kg
(96.8 lbs)
Lexmark X738dte
Printer with 550-sheet optional
drawer
909 mm
(35.8 in)
546 mm
(21.5 in)
622 mm
(24.5 in)
48.3 kg
(107 lbs)
Paper input options
550-sheet drawer 122 mm*
(4.8 in)
435 mm
(17.1 in)
545 mm
(21.5 in)
4.4 kg
(9.7 lbs)
550-sheet Specialty Media
Drawer
122 mm*
(4.8 in)
435 mm
(17.1 in)
545 mm
(21.5in)
4.4 kg
(9.7 lbs)
High-capacity input tray
(2000-sheet) only
387 mm
(15.2 in)
435 mm
(17.1 in)
545 mm
(21.5 in)
26.1 kg
(57.5 lbs)
Furniture options

Table of Contents

Related product manuals