1-4 Service Manual
7526
Memory
Resolution
The following resolutions are available:
• 4800CQ (default resolution)
• 1200 x 1200 dpi (at reduced printer speed)
Data streams
ADF type X734de—Simplex ADF with C-shaped path
X736de, X738de, X738dte—Duplex scan, recirculating (RADF), C-shaped
path
Optical resolution ADF
(monochrome and color)
Maximum 600 x 600 dpi
ADF input and output
capacity
50 sheets (20 lb or 75 g/m
2
bond)
Scanner media depth
(thickness)
Maximum: 0.15 mm
Minimum: 0.05 mm
ADF scanner (continued)
Scanner media weight Maximum: 32 lb. (120 g/m
2
)
Minimum: 14 lb. (52g/m
2
)
Scan area - ADF Maximum: 8.5 in. x 14 in. (216 mm x 355 mm) SEF
Minimum: 4.1 in. x 5.8 in. (105 mm x 148 mm) SEF
Printer
Print technology Belt fuser
Paper feed orientation Short Edge Fed (SEF)
Fax
Modem Built-in Group 3-compatible, full function fax, 33,600bps, Max V.34 Half
Duplex
Memory
All models
Standard memory—The standard RAM is soldered onto the system board.
Memory size
512MB
Optional memory—Optional DIMM (Dual Inline Memory Module) is a card that can be plugged into an
available memory slot on the system board. Flash memory is a card that can also be plugged into an
available slot. One firmware card (DLE) and one flash memory card are supported.
Maximum number of memory (DIMM) slots
1
Maximum number of flash memory slots
1
DIMM memory sizes available
256MB, 512MB, 1024MB
Flash (Nand Flash)
256
Maximum possible memory
1536MB
To Next Page
Loading...
