Diagnostic aids 3-43
7526
To change the settings for Env Prompts:
1. Touch Envelope Prompts in the Config Menu.
2. Touch the left or right arrow to toggle between Auto, Multi-Purpose Feeder, and Manual Envelope.
3. Touch Submit.
Submitting changes… is displayed.
You are automatically returned to the Configuration main menu.
Action for Prompts
This setting gives the user the option of having the printer resolve change prompt situations without requiring
any user assistance. If the Prompt user value is selected, the printer displays change prompts if the job does
not match the media in the selected source. The user must select another source or change the paper. If
Continue or Use current is selected, the printer acts as if the user made the selection Continue or
Use current and continues without user intervention, in most cases.
1. Touch Action for Prompts in the Config Menu.
2. Touch the left or right arrow to toggle between Prompt user, Continue, and Use current.
3. Touch Submit.
Submitting changes… is displayed.
You are automatically returned to the Configuration main menu.
Duplex Gloss
Generates higher quality duplex copies than when using the normal duplex mode. The major difference between
normal duplex and duplex gloss mode is the number of sheets in the duplex print media path. Normal duplex
mode feeds two sheets simultaneously, while duplex gloss feeds only one sheet.
Selections include Off (default) and On.
Jobs on Disk
Lets the user select whether or not the printer deletes all buffered jobs on the hard disk. This menu item only
appears if a hard disk is installed. It appears even if no buffered jobs exist on the hard disk.
Selections include Do Not Delete and Delete.
Note: Delete does not remove Print and Hold jobs. Use Remove Held Jobs in the Utilities Menu (user menu)
to delete these jobs.
To delete jobs on stored on the hard disk:
1. Touch Jobs on Disk in the Config Menu.
2. Touch Delete to erase stored jobs, or touch Do not delete to return to the menu without deleting any jobs.
Jobs On Disk
Delete Do not delete
To Next Page
Loading...
