Diagnostic aids 3-3
7526
Diagnostics menu
Diagnostics menu structure
When the Diagnostics menu is entered, each item displays on the operator panel. When a diagnostic test is
selected from the main menu, a sub menu displays and each individual test displays in the order shown. Any
options that are referred to in the menus are displayed when the option is installed.
Available tests
The tests display on the operator panel in the order shown:
Registration
Top Margin See “Registration” on page 3-6.
Bottom Margin
Left Margin
Right Margin
Skew See “Skew” on page 3-6.
Quick Test See “Quick Test” on page 3-8.
SCANNER TESTS
ASIC
Feed Test
Sensor Test
ALIGNMENT MENU
Cyan See “Alignment Menu” on page 3-11.
Yellow
Magenta
Factory Scanner
Factory Manual A summary page for all the color alignment settings. Can be used in
place of alignment pages for each individual color.
Exit
Diag Menu
Registration
ALIGNMENT MENU
MOTOR TESTS
PRINT TESTS
HARDWARE TESTS
SCANNER TESTS
To Next Page
Loading...
