2-8 Service Manual
7526
User status and attendance messages
Error code Action
Close Front Door If you continuously get this error, then either 24 V interlock switch or 5 V interlock switch is
bad. Go to “5 V interlock switch service check” on page 2-134 and “24 V interlock
switch removal” on page 2-136.
Close top access cover
and front door
Show me
Close the covers top access cover and front door securely.
If you do not get a Close Top Access Cover when it is open, then go to “920.26—POST
service check” on page 2-127.
Disk Corrupted,
Reformat?
The printer has attempted a disk recovery and cannot repair the disk. The disk must be
formatted to use.
Warning: All files stored on the disk will be lost.
Held Jobs May Not Be
Restored
The printer has attempted to restore Held jobs, but not all were restored.
Insert Tray <x> Insert tray to clear the message.
Load <source>
<custom type name>
Load paper in the indicated source and of the indicated type. Additional messages may
include:
• Paper loaded—Touch Continue.
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load <source>
<Custom String>
Load paper in the indicated source, touch Continue.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load <source> <size> Load paper in the indicated source and of the indicated size, touch Continue.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load Manual <custom
type name>
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
touching Select indicates to the printer it should search for a source with the proper custom
type.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
Load Manual
<custom string>
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
touching Select indicates to the printer it should search for a source with the proper custom
string.
Additional messages may include:
• Show Me—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
To Next Page
Loading...
