1-10 Service Manual
7526
Input and output capacities
The following table describes the media options that each model supports, and the estimated capacities in stand
and maximum configurations. Capacity may vary and is subject to media specifications and printer operating
environment. The capacities are based on plain paper at 75g/m
2
.
Function
Support by model
Lexmark X734de,
X736de, X738de
Lexmark X738dte
Standard input sources
Primary tray capacity (sheets) 550 1,100
Multipurpose feeder capacity (sheets) 100 100
Number of standard sources (primary tray
and multipurpose feeder)
23
Total standard capacity (sheets) 650 1200
Optional input sources
550-Sheet Drawer (sheets) 550 550
High-capacity input tray (HCIT) (sheets) 2,000 2,000
Specialty Media Drawer (sheets)* 550 (or 85 envelopes) 550 (or 85 envelopes)
Maximum number of high-capacity input
tray (must be installed on the bottom)
11
Maximum number of standard and
optional input sources*
55
Maximum capacity for standard and
options input sources (sheets)*
3,200* 3,200*
Standard output bin capacity (sheets) 250 250
Maximum output bin capacity (sheets) 250 250
Duplex capability Standard
* Optional input drawers include the 550-Sheet Drawer, 550-sheet Specialty Media Drawer, and High-
capacity input tray (HCIT). The maximum number of input options is dependent upon whether the MFP is
used on a desktop/tabletop or floor-standing with a caster base, and if the configuration meets UL Safety
specifications. Please refer to www.lexmark.com/multifunctionprinters for more information.
To Next Page
Loading...
