Lexmark X734DE - Clear Custom Status; Pel Blurring; USB Speed; Exit Config Menu

Diagnostic aids 3-47
7526
Go Back
Previous
Next
Clear Custom Status
Executing this operation erases any strings that have been defined by the user for the Default or Alternate
custom messages.
To clear custom strings:
1. Touch Clear Custom Status in the Config Menu.
2. Touch Clear Custom Status again to confirm.
Clear Custom Status... appears.
Press Back to return to the Config Menu.
Pel Blurring
Customers who notice step artifacts in their error diffused copies to activate the pel synthesis function. The
settings are On and Off (the default is Off).
1. Touch Pel Blurring in the Config Menu.
2. Touch the left or right arrow to toggle between On and Off.
3. Touch Submit.
USB Speed
A value of Full forces the USB port to run at full speed, and also disables its high-speed capabilities. Settings are
Full and Auto. Auto is the default.
To set USB Speed:
1. Touch USB Speed in the Config Menu.
2. Touch the left or right arrow to toggle between Full and Auto.
3. Touch Submit.
Exit Config Menu
Touch Exit the Config Menu. The printer performs a power-on reset and returns to normal mode.