1-6 Service Manual
7526
Electrical and power specifications
The following table specifies nominal average power requirements for the basic printer configurations. All power
levels are shown in Watts (W). Maximum current is given in Amperes (A).
Low-voltage models
• 110 to 127 V ac at 50 to 60 Hertz (Hz) nominal
• 90 to 135 V ac, extreme
High-voltage models
• 220 to 240 V ac at 50 to 60 Hz (not available in all countries)
• 198 to 254 V ac, extreme
Notes:
• Using a 220 V ac to 110 V ac power converter with the low-voltage printer is not recommended.
• Using an inverter (12 V dc to 120 V ac for example) to power the printer is not recommended.
• Only duplex models are ENERGY STAR certified.
Printing states Lexmark X734de Lexmark X736de
Lexmark X738de,
X738dte
Printing states
Off 0 W0 W0 W
Power Saver 24 W 27 W 27 W
Ready mode 60 W 70 W 70 W
Continuous copying 530 W 600 W 600 W
Continuous printing 490 W 560 W 560 W
Typical Electricity Consumption (TEC)
Default settings 6.18 kwh/week 7.22 kwh/wk 7.22 kwh/week
Eco Mode settings 5.19 kwh/week 5.93 kwh/wk 5.93 kwh/week
Maximum current while printing
100 Volts 9 A 9 A 9 A
120 Volts 8 A 8 A 8 A
230 Volts 4 A 4 A 4 A
To Next Page
Loading...
