Lexmark X734DE - Disk Encryption

3-44 Service Manual
7526
Go Back
Previous
Next
Disk Encryption
Controls whether the printer encrypts the information that it writes to the hard disk.
Warning: When the value for Disk Encryption, the printer completely formats the hard disk which means that all
information on the disk is deleted.
If an encrypted disk is removed from the printer and another disk is installed, the Disk Corrupted. Reformat?
message appears. The newly installed disk must either be formatted or removed from the printer.The Disk
Encryption menu item only appears when:
• A non-defective disk is installed in the printer.
• The values of bits 3-2 of digit 4 in the Configuration ID 2 are either 01 for Supported, or 10 for Supported
with an internal network adapter (INA).
Selections include Disable (default) and Enable. When Disk Encryption is selected, Yes or No appears for you
to confirm. Select either Yes or No. To cancel, touch No.
To encrypt a disk:
1. Touch Disk Encryption in the Config Menu.
2. Touch Enable to encrypt the disk.
Disk Encryption
Disable
Enable
Contents will be lost. Continue?
Yes No