Lexmark X734DE - Page 235

Diagnostic aids 3-39
7526
Go Back
Previous
Next
11. Touch ADF Front.
Adjust the Left Margin and/or the Top Margin to match the original.
12. Touch Submit.
Submitting changes… is displayed.
13. If the pages match, continue to step 14. If the pages do not match, repeat steps 8 through 12, until you are
satisfied.
14. Place the original Quick Test in the ADF facedown, and touch Copy Quick Test.
15. Examine the copy of the Quick Test, and compare it to the original. If the pages match, you are done. If the
pages do not match, continue to the next step.
16. Touch ADF Back. (This setting only appears on duplex machines)
Adjust the Left Margin and/or the Top Margin to match the original.
17. Touch Submit.
Submitting changes… is displayed.
Touch Back at any time to return to the initial manual scanner registration screen without saving any changes.
Selection Effect
Horizontal Adjust • Decrease the value to move the margin to the left
• Increase the value to move the margin to the right
Top Margin • Decrease the value to move the margin down
• Increase the value to move the margin upward.
Selection Effect
Horizontal Adjust • Decrease the value to move the margin to the left
• Increase the value to move the margin to the right
Top Margin • Decrease the value to move the margin down
• Increase the value to move the margin upward.
ADF Front
Top Margin
Horizontal Adjust
14
3
ADF Back
Top Margin
Horizontal Adjust
14
3