4-16 Service Manual
7526
Alignment (cyan, yellow, and magenta)
1.
Touch Back until you reach the top menu, and touch Alignment Menu.
2. Select Cyan.
3. Touch the left or right arrows to set Top Margin to zero.
4. Do the same for Left Margin, Right Margin, Bottom Margin, Skew, and Bow.
5. Touch Submit to enter all the values.
It is important to set all the values to zero before starting.
6. Touch Quick Test in the Cyan menu.
Two pages print. You may have to print these pages several times until you get T (Top Margin) and
Z (Skew) aligned. Do not go to step 2 until T and Z are aligned. The first page is similar to the following:
Cyan
Left Margin
Right Margin
Skew
Bow
Top Margin
Quick Test
0
0
0
0
0
To Next Page
Loading...
