Diagnostic information 2-3
7526
USB direct port Insert a USB flash drive to send data to the printer.
Insert a USB cable from a digital camera to print photos with a PictBridge-
enabled digital camera.
Numeric keypad Consists of the numbers 0–9, a backspace button, and a pound (#) button.
Touch Select functions as a select button. Press this button to:
• Open a menu and display the first item in the menu (called a menu item).
• Open a menu item and display the default setting.
Touch Submit to save the displayed menu item as the new user default
setting. The printer issues a Saved or Submitted Selection message and
returns to the menu item.
Note: When a new setting is saved as the user default setting, it remains in
effect until new settings are saved or until factory defaults are restored.
Settings chosen from the software application can also change or override the
user default settings selected from the operator panel.
Touch these buttons to scroll up or down through menus, menu items, or
settings, called menu item values, or to scroll between screens and menu
values.
Touch these buttons to increase or decrease the value.
Press Cancel to stop or suspend all job activity. The Cancel functions as a
stop button.
Home Touch Home to return to the initial menu page.
Menus Press Menus to open the administration menus. These menus are only
available when the printer is in the Ready state.
Button or light Function
To Next Page
Loading...
