LogTag TRIX-8 - REVISION HISTORY

LogTag TRIX-8/TRIX-16 Work Instruction Manual Revision 9.20 Page 2/53
REVISION HISTORY
Version
Date
Author
Description
5.00
4/6/04
CW
Initial 5.00 release – released to support case changes with lightpipes & screws
5.01
5/6/04
CW
Added use of test top half case in section 2.2
5.02
15/6/04
CW
Added statement for ambient temperature specification for Test & Setup
Added torque limit for screws
Added data file management instructions
5.03 28/8/04 CW Added serial number file maintenance instructions
Added PCBA fixture setup details
Added new images
5.04
2/9/04
CW
Revised file date/time of LT_V120.HEX firmware file
5.05
12/9/04
CW
Added APPENDIX5 : test results files and maintenance
5.06
11/10/09
CW
Added extra detail & images on riveting
6.00
9/11/04
CW
Added customisation step
6.01 14/2/05 CW various corrections
7.00
26/5/05
CW
- Updated to include new production software (10r75) features
- New serialisation maintenance system
- Rework Customisation (APPENDIX 7) added
-
Option for foam dot on battery instead of adhesive
7.01
31/5/05
CW
- typo corrections
8.00
1/4/06
CW
New TRIX PCB & hibernate
8.01
6/4/06
CW
- corrected heading on pg 23 and PIC part number on Components List
8.02 4/6/06 CW - Correct errors in software description in Test & Setup
8.10
14/11/06
CW
- Documented features of 1.1r25 prod s/w including logging start test in Test & Setup
- Changed crystal mounting procedure to not involve soldering the can but to use RTV
8.20
24/7/07
CW
Details current procedures (which were slightly different to v8.10 WIM) and includes images
of current fixtures in use
8.30
2/8/07
CW
- 1.1 r35 production software
- Changed assembly procedure to do complete product assembly prior to Test & Setup
8.40
22/2/08
CW
- Updated firmware specification to v1.31
- Updated to prodn software version 1.1r52
- Updated OS specification to Win XP / 2000
9.00
23/10/08
CW
1.1r58 production software
- detailed Test-Setup using interface with integrated temperature sensor
- detailed Check-Final using interface with integrated temperature sensor
- detailed new Customisation-sensorcheck test using interface with integrated temperature
sensor
9.10
6/4/10
CW
- Updated software definitions and images for 1.1r84 production software
- updated secition 1.1 to define 1.4 f/w
- added image of thermistor soldering heatsink arrangement
- 1.4 firmware appendix update
- barcode scanning batch id code using issued batch document
- removed section 4 “Customisation with Sensor Check”
9.20 09/9/10 CW - Renamed Summary flowchart section title to detail TRIX-8 & TRIX-16
- Section 1.1 updated to detail TRIX-8 & TRIX-16
- Section 1.5 updated to detail TRIX-8 & TRIX-16 PCBA handling
- Updated to detail production software version 2.0r5
- Reorganised APPENDIX numbering
- Added APPENDIX 1B : TRIX-16 Component map
- Added APPENDIX 2B : TRIX-16 Circuit diagram
- Updated APPENDIX 3 : Component list to support TRIX-16