LogTag TRIX-8/TRIX-16 Work Instruction Manual Revision 9.20 Page 38/53
Customisation (cont)
Setup:-
Turn on PC, ensure the interfaces are plugged into the com ports and start up “Customisation” software
(by selecting or double clicking Customisation icon on desktop).
The screen will display as below with prompt for entering the batch ID for the production order.
The batch ID is a 24 character code which defines the customer, order quantity, LogTag configuration and
labels to be attached. A batch ID is supplied for each customer order.
The batch order is supplied as a batch document and it provided with sheets of labels for each subcarton
and carton. These labels include the batch code and a barcode of the batch code which can be directly
barcode scanned into the above software prompt.
To Next Page
Loading...
