Lorenz Compact 7 Plus - Page 42

44 User Manual
Tracks & Routes: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Tracks & Routes" + 'ENTER'
Underwater Objects: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Underwater Objects" + 'ENTER'
Depth Range: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+"Depth Range" + 'ENTER'
Depth Range Min: Sets a min reference depth value. The default setting is 3 Mt.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Depth Range Min" + 'ENTER'
Depth Range Max: Sets a max reference depth value. The default setting is 10 Mt.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+"Depth Range Max" + 'ENTER'
Rocks >: Sets a min reference rocks value.
'MENU' + "MAP SETTINGS" +'ENTER'+ "Other Map Configurations" + 'ENTER'
+ "Rocks >" + 'ENTER'
Rocks <: Sets a max reference rocks value.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Rocks <" + 'ENTER'
Land Elevation Values: the Land Elevation areas are always shown, but it is pos-
sible to set On/Off the Land Elevation display. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Lan Elevation Values" + 'ENTER'
Roads: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Roads" + 'ENTER'
POIs (Points Of Information): On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "POIs" + 'ENTER'
Lat/Lon Grid: On/Off. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER'
+ "Lat/Lon Grid" + 'ENTER'