Lorex LH314 User Manual

60
Appendix B: Setting up Local and Remote Viewing
I have configured DDNS for remote access to my system:
Go to www.lorexddns.net and create a new account
Domain: ____________________________________
User ID: ____________________________________
Password: __________________________________
I have configured my system to connect to the DDNS server:
To enable DDNS on your system:
1. Open Internet Explorer (version 6 or above) and enter the IP address of
your DVR in the
address bar (i.e. 192.168.xxx.89). DVR Netviewer opens.
2. Log in using your LA
N user
ID and password (by default, ID 9; password 3333).
3. Click the Setup butt
on. The Setup menu opens.
4. Under Network, click DDNS.
5. Under DDNS
Select, click the drop-down menu and select http://lorexddns.net
6. In the corresponding text fields, enter your DDNS username and password.
NOTE: Obta
in this information from the confirmation email after registering for the free Lorex
DDNS serv
ice.
7. Under DDNS Domain Name, enter only the first portio
n of your DDNS domain from the
confirmation email. For example, if your domain name is tomsmith@lorexddns.net, you only
need to enter
tomsmith in the text field.
8. Click Submit to sav
e your settings or click Cancel to exit without saving.
NOTE:
Once you have saved your DDNS settings, your must reset your DVR in order for the changes to
take effect. Disconnect and reconnect the power cable from the rear panel to reset.
I can access my system from a remote PC:
To access your system remotely:
1. Open Internet Explorer and enter your DDNS address
from the confirmation email. For
example,
tomsmith.lorexddns.net
2. Log in using your LAN user ID and password (by default, ID 9; password 3333).
ATTENTION: You MUST enter your DDNS information LOCALLY before
attempting remote access.

Lorex LH314 Specifications

General

Brand	Lorex
Model	LH314
Category	DVR
Language	English