Need help?Do you have a question about the LOYTEC L-IP and is the answer not in the manual?
General| Product Type | Network Router |
|---|---|
| Manufacturer | LOYTEC |
| Model | L-IP |
| Ethernet Ports | 2 |
| Mounting | DIN rail |
| Protocols Supported | BACnet/IP, Modbus TCP |
| Ethernet Speed | 10/100 Mbps |
| Power Supply | 24 V DC or PoE |
Overview of L-IP, Redundant version, models, and scope.
Highlights key changes and new features introduced in L-IP version 6.1.
Step-by-step instructions for physical installation of L-IP devices.
Guide to configuring IP settings via console, web, or LCD display.
Setting up the configuration server and L-IP Redundant for operation.
Details enclosure, label, and mounting guidelines for the L-IP device.
Explains LED indicators, Wink action, diagnostics, and Status button functions.
Information on wiring L-IP devices, including network media and termination.
Connecting to the L-IP via serial console and understanding the self-test.
Accessing and configuring system, CEA-709, IP, and CEA-852 settings via console.
Resetting to factory defaults and accessing device statistics via console.
Accessing the web interface and managing user accounts and passwords.
Comprehensive configuration options via the web interface.
Viewing system, IP, CEA-852 statistics, and running communications tests.
Accessing documentation and managing device reset, contact, and logout.
Explains the four CEA-709 routing modes: Configured Router, Smart Switch, Repeater, etc.
How CEA-852 devices interact with a configuration server.
Configuring the L-IP behind firewalls and NAT routers.
Configuring multi-cast and advanced timing for WAN environments.
Using L-IP as a standard router, requiring network management tools.
Operating L-IP as a plug&play smart switch for network management.
Using L-IP in LNS/LonMaker networks and as a network interface for LNS applications.
Supporting remote LPA access for CEA-709 packet analysis.
Covers fault detection, operating modes, network integration, and installation steps.
Details plug-in operation modes, status, statistics, alarms, node list, and parameters.
Web interface features for status, statistics, alarms, node list, and parameters.
Explains Node Object, Bus Loop Monitor, Device Monitor, Twin Router, and Channel Monitor variables.
Configuring and using the SNMP server for network monitoring and data exposure.
Details on TP-1250 and FT-10 network media and their characteristics.
Information on RS-485 ports, bit-rates, and termination requirements.
Cabling options, upstream topologies, preconditions, switch settings, and testing for redundant Ethernet.
Introduction to WLAN modes, 802.11s mesh networking, and hardware installation.
Preferred method for updating firmware using the web interface.
Updating firmware using the serial console and LSU Tool.
Updating firmware using the L-852 Download Tool over the IP network.
Resolving LonMaker errors, packet routing failures, and default gateway problems.
Diagnosing problems indicated by LEDs and IP-852 traffic flooding.
Contact information for LOYTEC technical support.
Configuring remote and local packet capture, and running Wireshark remote capture.
Security steps for initial device installation and managing firmware updates.
Securing device ports and optional services like FTP, Telnet, Web.
Information on the device's log file and auditable events for security.
Technical specifications for specific L-IP models.
Technical specifications for the LIP-xxxxECTB model.
Technical specifications for LIP-3ECTC and LIP-33ECTC models.
Technical specifications for the LIP-3333ECTC model.
To Next Page