L-IP User Manual 172 LOYTEC
Version 6.1 LOYTEC electronics GmbH
17 Revision History
Added menu item 9 (device statistics) in Section 4.10
Improved behavior of cnip LED in Section 3.4.7
Added automatic IP connection keep-alive in Section 4.6.8
Add Section 2.3 IP Configuration for Client Device via Web-Interface
Add Section 4.4.3 Option 8 – Webserver
Add Section 4.4.4 Option 9 - Change Web server Password
Changed menu in Section 4.5 EIA 709 Configuration Menu
Rewrite Section 4.5.1 and Section 4.5.2.
Add Section 4.7.10 Option 9 - Location string
Add Section 4.8.7 Option 7 - Auto members support
Add Section 4.8.8 Option 8 - Roaming members support
Add Section 4.8.15 Option s - Show device statistics
Add Section 4.8.17 Option r - Recontact devices & list channel members
Add new device states to Table 14
Add flags to Figure 35: List all CN/IP channel members.
Add Chapter 5 Web Interface
Add Section 4.4.2.3 Option 3 - Set router configuration according to DIP
switch
Add Section 7.9 Remote LPA Operation
Rewrite Section 7.11.3 DHCP
Added note about PC NTP client to Section 7.10.1
Add Section 11.7 IP-852 traffic may flood the entire switched IP network
Corrected information on controlling RS-485 bit-rate auto-detection with
DIP switch, see Section 3.6
Add route command starting with firmware version 2.1 in Section 2.3 and
Section 5.1.
Add Section 4.10.6 Option 6 - Enhanced Communications Test
Add Enhanced Communications Test to Section 5.4
Added extended NAT, multi-cast, Auto-NAT, new enhanced
communications test, new channel list in Web, i.LON 600. Corrected
terminals 25, 26.
Updated manual for multi-port L-IP.
Updated manual for L-IP Redundant.
Updated manual for LIP-xxxxECTB.
Updated for firmware version 6.0. Remove information on legacy L-IP
products. Updated images to show new enclosures. Updated to new
manual design. Added Chapter “Security Hardening Guide”. Minor
corrections.
Updated for firmware version 6.1. Added Section 1.2 L-IP Models. Added
Chapter 2 What's in in L-IP. Chapter 4 refers to installation sheets,
removed terminal layout, enclosure, product labels, DIP switches. Added