L-IP User Manual 79 LOYTEC
Version 6.1 LOYTEC electronics GmbH
6.2.16 SNMP
The device has a built-in SNMP server. All system registers and OPC-exposed data points
are available as variables in the SNMP management information base (MIB). The MIB
definition can be downloaded from the Web interface as shown in Figure 72. One can
choose between a text and an XML format, depending on the SNMP tool in use. For more
information on SNMP on the device please refer to Section 10.1.
Figure 72: Get the SNMP MIB from the Web interface
6.2.17 Documentation
The Documentation page in the Config menu allows uploading documentation files or
configuring links to external documentation (e.g. Wiring plans, etc.). The documentation
configured on this page is accessible via the Documentation menu (see Section 6.4).
Figure 73: Upload and configure documentation.
To upload a documentation file click on the Choose File button. This opens a file dialog.
Chose the file to upload. Click on the Upload button to start the upload of the selected file.
After the upload is completed the file appears in the Documentation files section. Enter a
link text used to display the uploaded file on the Documentation page.
To add a documentation link, click on the symbol in the header row of the
Documentation links section. Enter the URL and the text used to display the link on the
Documentation page.
Links and files can be set active and inactive on the Documentation page by checking the
Enabled check box. Inactive entries are not displayed on the Documentation page. The
To Next Page
Loading...