LOYTEC L-IP - Using the L-IP as the Network Interface for LNS Applications

L-IP User Manual 100 LOYTEC
Version 6.1 LOYTEC electronics GmbH
Detailed instructions on how to use the L-IP together with LNS based network management
tools can be found in Section 14.
8.4 Using the L-IP as the Network Interface for LNS Applications
The L-IP can be used as a local or remote network interface for LNS based applications like
LonMaker to access CEA-709 networks. Therefore the CEA-852 network interface must be
enabled on the PC where the LNS application program is installed and the IP address of the
PC must be added to the configuration server:
1. Add the IP address of the PC to the configuration server’s list of devices (see
Section 6.2.13).
Figure 90: Icon for LonWorks Interfaces in Windows 7 Control Panel.
2. Select the LonWorks Interfaces utility program from your Control Panel and select
the IP-852 tab.
Figure 91: Add a new LNS IP interface to your PC.
3. Click on Add.
Figure 92: Give the new interface a name.