LOYTEC L-IP User Manual

L-IP User Manual 58 LOYTEC
Version 6.1 LOYTEC electronics GmbH
6 Web Interface
The L-IP comes with a built-in Web server and a Web interface to configure the device and
extract statistics information. The Web interface allows configuring the IP settings,
CEA-709, CEA-852 and other configuration settings.
6.1 Start Screen and Account Management
In a Web browser, enter the default IP address 192.168.1.254 of the device. Note that if
your PC has an IP address in a subnet other than 192.168.1.xxx, you must open a command
tool and enter the following route command to add a route to the device.
To Add a Route to the Device
1. Windows START  Run
2. Enter ‘cmd’ and click OK.
3. In the command window enter the command line
route add 192.168.1.254 %COMPUTERNAME%
In Windows7 replace %COMPUTERNAME% with the PC's actual IP address.
4. Then open your Web browser and type in the default IP address ‘192.168.1.254’.
5. The device information page should appear as shown in Figure 48.

LOYTEC L-IP Specifications

General

Brand	LOYTEC
Model	L-IP
Category	Network Router
Language	English