LSIS sv-ig5a - Devicenet Communication Module

13-8
13.6 DeviceNet/Ethernet Communication Module
 iG5A for Communication
1) iG5A for communication type has to be used for using DeviceNet and Ethernet
communication option modules.
2) Please refer to „Installation of communication module‟ in user‟s manual for installation for
iG5A DeviceNet and Ethernet communication.
3) iG5A for communication has been designed to install the communication option module
easily.
4) Production name of communication type is as follows.
<Production name of communication type>
SV
xxx
iG5A
-
2
FB
LS Inverter
Capacity
Note1)
Type
-
Input Voltage
Note2)
iG5A for
Communication
Note 1) The capacity range is applied from 0.4 to 22 kW products.
Note 2) Input Voltage is classified as 1 (Single phase 200V class),
2 (Three phase 200V class) and 4 (Three phase 400V class).
Remark
 To use the communication option module for iG5A, you must be use the iG5A for
communication.
 The name of iG5A for communication is indicated as „FB‟.
 Communication function supports above the iG5A for communication‟s version of software
2.3 (DeviceNet) and 2.4 (DeviceNet, Ethernet).
 Communication option
1) Please use the option user‟s manual contained in package for using option module for
iG5A .
2) Communication option code
Product Code
Product Name
64100019
iG5A DeviceNet Module
61400020
iG5A Ethernet Module
For Service Call 800-848-2504
For Service Call 800-848-2504