XGB Analog edition manual
(3) Moving average
It accumulates temperature conversion values of a selected channel as many as set and
displays the average of the total sum in digital data. In case of the moving average, it outputs
average per scan.
Setting range of average number = 2 ~ 100
5.3.5 Max./Min. display
It displays maximum/minimum value of temperature conversion value of a selected channel for a
selected section (a section allowed for max./min. search)
(1) time/frequency average characteristically does not output temperature data every conversion time
and instead, it keeps a feature to maintain the previous status until it reaches time/average
frequency.
(2) In case of moving average, it outputs the converted temperature as taking temperature history and
average, which are entered previously, every conversion time, so it can obtain relatively faster data
response than time/frequency average.
(3) Filtering can be processed with one of the foresaid averaging functions simultaneously. If
simultaneous process is selected, filtering would be processed first and it averages and output
temperature value in digital value. At the moment, the digital data output (temperature) is displayed
as the value gained after the final process.
Remark
Status of command allowing/prohibiting max./min. search
Maintaining previous
max./min. value
Initializing max./min. value
Initializing max./min. value
Maintaining previous
max./min. value
5 - 18
To Next Page
Loading...
Need help?
General
