LSIS XBF-AD04A - Setting Sequence before Operation

Chapter 10 Analog I/O Option Board (XBO-AH02A)
Chapter 10 Analog I/O Option Board
10.1 Setting Sequence before operation
Before using the analog I/O option board, follow steps below.
XBO-AH02A
Checking performance specification
Wiring
Reading/writing analog I/O data
Setting parameter
Programming
Specification (10.2.2 performance specification)
 Operating environment
 I/O type and range
 Digital I/O range
 Analog I/O range
Wiring
 Wiring analog I/O
Analog I/O test
 XG5000 special module monitor test mode
Parameter
 XG5000 I/O parameter
Programming
 Programming for reading/writing
analog data (U device)
Refer to trouble shooting when there is
error or analog I/O data is not normal
10 - 1