Lucent 5ESS DRM User Manual

— If AM recovered from backup tape or disk, restore switching module ODD from
switching module ODD tape(s), and pump the switching module.
— Restore primary MHDs.
— If AM recovery was from a software backup disk, restore that disk to spare
status.
— Allow Power Switch Monitor scanning of software backup disks.
— Restore control units (CU) and all MHDs to duplex.
— LATER: If the AM recovered on the backup root file system, copy backup
partitions to root partitions. Then after duplexing the disks, reboot the AM on
root configuration with 53.
PROCEDURE
1. Follow these subprocedures in the order in which they are presented.
• “Post AM Recovery Cleanup,” Subprocedure 7.2.1.
• “Restore Switching Module Text on Outboard MHDs,” Subprocedure 7.2.2.
• “Restore the Switching Module ODD,” Subprocedure 7.2.3.
• “Recover from BROOT Configuration,” Subprocedure 7.2.4.
SYSTEM RECOVERY
Procedure 7.2
235-200-150
January 2003
Page 7.2-2 Issue 3.00

Lucent 5ESS DRM Specifications

General

Brand	Lucent
Model	5ESS DRM
Category	Control Unit
Language	English