2 - 55
A B
1
EDITING A SUB-MENU
- After selecting a menu, select the required sub-menu (if necessary) using
the ARROW keys
.
- Press the MINUS/PLUS keys
to change the settings.
- Confirm by pressing the key OK
. A confirmation message is displayed.
- Press the key OK
again to confirm.
- Return to previous page by pressing the key EXIT
.
- Return to the MENU PAGE by pressing the MENU key
.
NOTE: SUB-MENU DEFINITIONS FROM MACHINE No. 949267.
WORK PAGE
The WORK PAGE
A
is displayed by default, and the basket controls are activated.
The WORK PAGE
B
is displayed when the ground controls are activated.
NOTE:
CONTROL PANEL AND SAFETY DEVICES ON THE GROUND.
IMPORTANT
A maintenance operation could be necessary when the maintenance alert (
1
spanner) is displayed.
Refer to the maintenance personnel.
FAULT PAGE
IMPORTANT
Certain controls may be locked depending on the fault.
Refer to the maintenance personnel if there is a fault.
A FAULT PAGE is displayed when a fault is detected.
- Press the FAULT key
to display the FAULT CODE/ALARM PAGE.
To Next Page
Loading...
Need help?
General
