Manitou 200 ATJ - Generator; Options; The Engine Must be Started to Activate the Generator; The Generator Has a Circuit Breaker for Resetting It

2 - 72
2
3
1
OPTIONS
1 - GENERATOR
Illustration of the generator button
1
= second version.

IMPORTANT

Do not connect the cord extensions, power supply bars or plugs with multiple sockets to the electric power socket in
the basket.
Overvoltages could occur when the generator is started.
The engine must be started to activate the generator.
- Press generator button
1
and release it to start the generator.
- Plug an electrical appliance into the electrical outlet in the basket.
- Press generator button and release it to stop the generator.
NOTE:
• Generator 110V/3.5kW: 1electric power socket (UK) delivering 110V/16A
maximum.
• Generator 220V/3.5kW: 1electric power socket delivering 220V/16A maximum.
• Generator 220V/5kW: 2electric power sockets delivering 220V/16A maximum.
The generator has a circuit breaker for resetting it:
- Press the generator button
1
and release it to stop the generator.
- Open the right-hand turntable cover.
- Locate the switch
2
on the generator
- Push it to the ON position.
Result:
• The switch must remain in the ON position, the indicator
3
should be green.
- Press the generator button and release it to start the generator.
- Check that the switch remains in the ON position and that the indicator is green.
- Close the right-hand turntable cover panel.
NOTE: Refer to the maintenance personnel if the circuit breaker is not working correctly.
547399 (01/03/2019) 200 ATJ
www.duma-rent.com