2 - 14
PLATFORM MANUFACTURER'S PLATE
The manufacturer's plate is riveted to the left side of the turntable or on the back of
the chassis.
FIRST VERSION:
"Model" Model
"Serial no." Serial No.
"Year of manufacture" Year of manufacture
"Empty weight" Unladen weight
"Power" Power
"Voltage" Voltage
"Inside/ Outside" Interior/Exterior
"Maximum load" Maximum load
"Maximum no of persons" Maximum number of persons
"Attachment" Equipment
"Manual forces" Manual forces
"Max. tilt" Maximum tilt
"Max. wind speed" Maximum wind speed
"Ext. electrical source" External power source
SECOND VERSION:
"Designation" Designation
"Year of manufacture" Year of manufacture
"Model year" Model year
"Unladen mass" Unladen weight
"Nominal power" Rated power
"Voltage" Voltage
"Inside/ Outside" Interior/Exterior
"Maximum load" Maximum load
"Maximum number of persons" Maximum number of people
"Mass of equipment" Equipment weight
"Manual forces" Manual forces
"Maximum inclination" Maximum tilt
"Maximum wind speed" Maximum wind speed
"Serial Number" Serial number
All other technical information for your platform is listed in the chapter: CHARACTERISTICS.
ENGINE
"Model" Model
"Serial No." Serial number
"Code No." Code number
"Type" Type
"Family" Family
"Approval number" Approval number
IDENTIFICATION OF THE PLATFORM
As our policy is to promote constant improvement of our products, our range of platforms may undergo certain modifications,
without obligation for us to advise our customers.
When you order parts, or when you require any technical information, always specify:
NOTE: In order to have all these numbers on hand when needed, it is recommended that they are noted in the spaces
provided, at the time of the delivery of the access platform.
To Next Page
Loading...
Need help?
General
