Maintenance work on the carrier
7.6 Transmission
7 - 44 3 302 756 en Maintenance manual
GMK6400
16.11.2018
7.6.3 Checking the oil level – power take-off
Spare parts
and
tools
– Receptacle, about 5 l (1.5 gal); à p. 2 - 4.
– Mirror on a rod.
Prerequisites – The truck crane must be raised on outriggers or parked over an inspec-
tion pit.
– The truck crane must be level.
– The transmission oil has cooled down to a temperature below 40 °C
(104
°F).
– The truck crane is not running and is secured against unauthorised use;
à p. 2 - 3.
Oil level type
• Use a mirror on a rod to provide a better
view of the sight glass (1).
• Check that oil is visible in the middle of the
inspection glass (1).
If the oil level is too low
• Top up the oil; à p. 7 - 49.
Designation Quantity GROVE part no.
Gasket 26 x 31 Cu DIN 7603 1 00117147
S
Risk of damage to the transmission!
If the oil level is too low or too high, this can lead to malfunctions and
transmission damage.
Check the oil level at the correct intervals.
To Next Page
Loading...
