Maintenance work on the carrier
7.19 Other maintenance work
7 - 134 3 302 756 en Maintenance manual
GMK6400
16.11.2018
7.19.5 Lubricating the connecting pins and socket pins
Grease, tools
–Brush.
Checks Depending on the equipment, there are various connecting and socket pins
on the carrier such as:
– Fastenings to hold the hook block on the bumper while driving on the
road
– Clamps for ladders on the carrier
– Hinged warning panels under the bumper,
– Fastenings for the outrigger pads and socket pins on the outrigger,
– Locks on the removable covers,
– Hinges on the doors and covers of the storage box.
• Check the pins for wear such as rust, deformation, broken clips, chains
and pin-type keepers.
• If the pins are damaged, have them replaced by Manitowoc Crane Care or
an authorised GROVE dealer or your qualified repair crew.
• Use only authentic replacement pins.
Lubrication
• Clean the pins.
• Lubricate the pins with a brush.
Lubricating
grease
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369
To Next Page
Loading...
