Maintenance work on the carrier
7.8 Axle lines
7 - 64 3 302 756 en Maintenance manual
GMK6400
16.11.2018
7.8.6 Final drives – Changing the oil
Oil, spare parts,
tools
– Drain channel.
– Receptacle, about 10 l (2.5 gal); à p. 2 - 4.
Prerequisites – The truck crane must be raised on outriggers.
– The engine must not be running and must be secured against unauthor-
ised use; à p. 2 - 3.
– The parking brake is released.
Gear oil
in litres (gal)
Designation
to DIN 51502
Specifications
Classification
GROVE part no.
Axle lines 1 + 2:
for each final drive:
3.8 (1.0)
Axle lines 4 + 5:
for each final drive:
6.0 (1.6)
C - LPF MIL-L 2105 B
API-GL-5
Viscosity:
Hyp SAE 90
ISO - VG 220
00552891
Designation Quantity GROVE part no.
Gasket 24 x 29 Cu DIN 7603 8 00117145
Gasket 30 x 36 Cu DIN 7603 4 00117151
O
Risk of environmental damage due to leaking consumables!
Always let consumables drain into suitable receptacles. Wipe up any
consumables that escape.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
To Next Page
Loading...
