Maintenance work on the superstructure
8.2 Symbols for maintenance work
16.11.2018
Maintenance manual 3 302 756 en 8 - 9
GMK6400
8.2 Symbols for maintenance work
Check the following symbols every day before starting work.
On the ECOS
display
• Open the Warning submenu in the crane cab;
à Operating manual.
You must carry out the corresponding maintenance work if a symbol is
displayed in red:
H
Warning messages e.g. regarding the engine can be monitored in the
driver's cab and in the crane cab;
à On the ECOS display, p. 7 - 12.
1 Oil filter 1 in the superstructure; Ã p. 8 - 53.
2 Oil filter 2 in the superstructure;
à p. 8 - 53.
3 Oil filter 3 in the superstructure;
à p. 8 - 53.
To Next Page
Loading...
Need help?
General
