Maintenance work on the superstructure
8.7 Hydraulic system
16.11.2018
Maintenance manual 3 302 756 en 8 - 49
GMK6400
8.7.6 Changing the ventilation filters
Spare parts
and
tools
Prerequisites – The engine must not be running and must be secured against unauthor-
ised use; à p. 2 - 3.
• Remove the cap (2).
• Change the filter (3) and screw on the cap
tightly.
• Reset the display by depressing the pin (1)
on the housing.
Designation Quantity GROVE part no.
Filter 2 03134932
O
Risk of damage to the environment from filter residues!
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.
To Next Page
Loading...
