Manitowoc GROVE GMK6400

Maintenance work on the carrier
7.14 Hydraulic system
16.11.2018
Maintenance manual 3 302 756 en 7 - 103
GMK6400
7.14.8 Changing the hydraulic oil filter
All oil filters must be replaced when changing the oil.
In the event of a warning message, the red symbols in the Warning
submenu indicate which oil filters you have to change.
Spare parts
and
tools
– Receptacle, about 5 l (1.5 gal); à p. 2 - 4.
– Torque wrench for a torque of 45 Nm (33 lbf ft).
Prerequisites – The engine must not be running and must be secured against unauthor-
ised use; à p. 2 - 3.
s
1 Red – Changing filters 1 and 2
3 Red – Changing filter 3
4 Red – Changing filter 4
5 Red – Changing filter 5
6 Red – Changing filter 6
Designation Quantity GROVE part no.
Filter (for filters 1 and 2)
Packing set
2 03329152
2 03135778
Filter (for filters 3 and 4)
Repair set
2 03140253
2 03135867
Filter (for filters 5 and 6)
Spring
O-ring
2 03142530
2 03142531
2 03142532
O
Risk of damage to the environment from filter residues!
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.