Maintenance work on the superstructure
8.6 Pump transfer case
16.11.2018
Maintenance manual 3 302 756 en 8 - 41
GMK6400
8.6.5 Changing the oil filter
If the visual display is no longer green, then you must replace the oil filter;
à Checking the oil filter, p. 8 - 35.
When changing the oil the oil filter must be replaced.
Spare parts
and
tools
– Torque wrench for 25 Nm (18.5 lbf ft).
– Receptacle, about 10 l (3 gal).
Prerequisites – The truck crane must be level.
– The engine must not be running and must be secured against unauthor-
ised use; à p. 2 - 3.
Changing the
oil
filter
• Release the receptacle (1) at the hexagon
head.
• Change the filter (2).
• Replace the gaskets.
• Fill the receptacle with clean oil and tighten
it – torque 25
Nm (18.5 ft lbf).
s
Designation Quantity GROVE part no.
Filter 1 03135866
Packing set 1 04161645
O
Risk of damage to the environment from filter residues!
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.
To Next Page
Loading...
