EasyManuals Logo

Manitowoc GROVE GMK6400 User Manual

Manitowoc GROVE GMK6400
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Maintenance work on the carrier
7.3 Engine
16.11.2018
Maintenance manual 3 302 756 en 7 - 23
GMK6400
• Have the radiator units (1) and (2) opened up by the repair specialists,
so
that the radiator fins are accessible.
• Have the radiator fins (4) cleaned on both sides, using suitable cleaning
agents.
• Have the fan impellers (6) cleaned.
• Have the cooling baffles (5) cleaned.
• Have the hoses and connections checked for damage and leaks.
• Have any damaged parts replaced.
After checking/
cleaning
• Remove all tools and cleaning equipment.
• Check that all the grilles (3) and plates (5) are securely fastened.
• Start the engine and wait until the fan impellers (6) rotate.
• Check that the fan impellers run freely (6).
• Check the respective temperature displays in the driver's cab;
à Operating manual.
• Switch the engine off.
• Check the radiator and connections for leaks.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc GROVE GMK6400 and is the answer not in the manual?

Manitowoc GROVE GMK6400 Specifications

General IconGeneral
BrandManitowoc
ModelGROVE GMK6400
CategoryConstruction Equipment
LanguageEnglish

Related product manuals