Matrox 4Sight - Auto-Logon Feature

Manually configuring the Windows NT Embedded registry 139
The following is a list of available display modes:
Auto-logon feature
By default, the auto-logon feature is enabled. To disable the
auto-logon feature or change its default settings, use the
NTConfig utility and select the ‘Auto Logon Settings...’.
Alternatively, you can manually change some of the following
keys in the registry:
640 x 480 256 colors at 60, 72, or 75 Hertz
800 x 600 256 colors at 60, 72, or 75 Hertz
1024 x 768 256 colors at 60, 70, or 75 Hertz
1280 x 1024 256 colors at 60 or 75 Hertz
640 x 480 65536 colors at 60, 72, or 75 Hertz
800 x 600 65536 colors at 60, 72, or 75 Hertz
1024 x 768 65536 colors at 60, 70, or 75 Hertz
Registry Keys Setup
HKEY_LOCAL_MACHINE\
SOFTWARE\Microsoft\
WindowsNT\
CurrentVersion\
Winlogon\AutoAdminLogon
Set DWORD to 0 or 1. Use 1
to activate the auto-logon.
\SOFTWARE\Microsoft\
WindowsNT\CurrentVersion\
Winlogon\
DefaultDomainName
Set STRING to a string
representing the default
domain name on which to
logon.
\SOFTWARE\Microsoft\
WindowsNT\CurrentVersion\
Winlogon\DefaultUserName
Set STRING to a string
representing the default user
name with which to logon.
\SOFTWARE\Microsoft\
WindowsNT\CurrentVersion\
Winlogon\DefaultPassword
Set STRING to a string
representing the password of
the default user name with
which to logon.