52 Chapter 3: Managing the Matrox 4Sight under Windows NT Embedded
Logging off or shutting down Matrox 4Sight
To logoff, press Ctrl-Alt-Del to access the Windows NT
Security dialog box. Click the Logoff... button, and then click
the Ok button to complete the logoff process.
To properly shut down Windows NT Embedded, press
Ctrl-Alt-Del and then click on the Shut Down button. Select
the shut down method and then click on the Ok button to
complete the shut down process.
With the appropriate applications, you can also shut down or
logoff the Matrox 4Sight remotely using the NTConfig
/Shutdown or /Reboot commands, respectively.
Guidelines for setting up remote
management of the Matrox 4Sight unit
To exploit remote management potential, you can issue
commands between a client (development PC) and a server
(Matrox 4Sight) through a TCP/IP communication channel. You
will have to design and install applications to send and
interpret commands that perform the required operation. To
develop these applications, refer to your Win32 API
documentation for a description of functions that exploit
network communication and functions that manage processes.
To Next Page
Loading...