156 Appendix C: BIOS reference
Advanced Configuration subscreen
MISCELLANEOUS OPTIONS section
■ Memory Speed Setting:
This field specifies the operating speed for the National
Semiconductor
®
Geode
™
GXLV
external memory interface.
Options:
■ Wake Option:
This field specifies the state of Matrox 4Sight after a power
interruption/failure has occurred. The Stay OFF option will
leave Matrox 4Sight off when power resumes.
If the Power-ON option has been enabled prior to a power
interruption/failure, Matrox 4Sight will be turned on when
power resumes.
Options:
❐ Stay OFF (default)
❐ Power-ON
■ Parallel Port Mode:
This field specifies the mode of operation for the parallel port.
The three supported signaling methods for bidirectional
communication are Enhanced Parallel Port (EPP), Enhanced
Compatibility Port (ECP), and Standard Parallel Port (SPP).
SPP is the original parallel port used on PCs. EPP/ECP are
high-speed ports built according to the IEEE 1284 Standard,
which specifies signaling methods that support older and
current peripherals. In general, EPP and ECP are for printer
and non-printer peripherals, respectively.
266 MHz processor
Normal (default) 76 MHz
Overclock 89 MHz
To Next Page
Loading...