Backing up your DiskOnChip image 51
Other useful remote commands
On the Matrox 4Sight unit and Windows NT Workstation
development computer, you can also use the following
commands:
Backing up your DiskOnChip image
If you have both a DiskOnChip and a hard disk on your Matrox
4Sight unit, we recommend that you copy all the files from the
\OS\WINNT sub-directory of the Matrox 4Sight CD to your
Matrox 4Sight unit’s hard disk before you start using the
Matrox 4Sight unit. This will eliminate the need to connect a
CD drive to the Matrox 4Sight unit in the unlikely event that
you have to recover from a corrupted DiskOnChip (cannot boot
under Windows NT Embedded).
1. Boot the Matrox 4Sight unit under Windows NT
Embedded.
2. From the Matrox 4Sight unit’s command prompt, connect
to a shared CD drive on the development computer.
3. Insert the Matrox 4Sight CD in the shared CD-ROM drive.
4. From the Matrox 4Sight unit, copy all the files from the
\OS\WINNT sub-directory of the Matrox 4Sight CD to
your Matrox 4Sight unit’s hard disk.
NET USE Drive: /DELETE Breaks the connection with a
shared resource.
NET SHARE ShareName /DELETE Stops sharing a resource.
NET VIEW \\MachineName
Lists all the resources that are
shared on a computer.
To Next Page
Loading...