Matrox 4Sight - Setting the Multi-Boot Option; Sharing and Connecting to Remote Directories

Setting the multi-boot option 49
Use the Regedit (Regedit.exe) editor to add environment
variables to the registry. Add or modify the registry entries of
the following registry sub-keys:
Setting the multi-boot option
The Matrox 4Sight unit has a multi-boot configuration. From
the OS loader selection menu, you can choose between Windows
NT Embedded and the Embedded DOS Interpreter. If a
selection is not made within 5 seconds, Windows NT Embedded
is used by default. To change the time-out length, open the
Boot.ini file using the Notepad editor (Notepad.exe) and change
the ‘timeout=5’ line accordingly. Setting this line to ‘timeout=0’
automatically starts Windows NT Embedded without any OS
loader selection menu.
Sharing and connecting to remote
directories
During remote application development, Matrox 4Sight will
need to use files on or share files with the development
computer (for example, to copy the application and DCF files
created on the development computer to the Matrox 4Sight
unit). For this reason, it is necessary to know how to connect
Registry Keys User Availability Setup
HKEY_LOCAL_MACHINE\
SYSTEM\
CurrentControlSet\
Control\
Session Manager\
Environment
These keys are global
and are available to all
users on the unit.
Create and modify
STRING keys at this
location to add or modify
your environment
variables, respectively.
HKEY_CURRENT_USER\
Environment
These keys are private
and are available to the
user currently logged on
the unit.
Create and modify
STRING keys at this
location to add or modify
your environment
variables, respectively.