Matrox 4Sight - ENCODER OPTIONS Section

Advanced Configuration subscreen 161
ENCODER OPTIONS section
■ Display Device
This field selects the display device.
Options:
❐ CRT Only (normal display (VGA) monitor; default)
❐ Encoder (composite and Y/C / RGB output)
❐ Standard Flat Panel
❐ Sharp Flat Panel
■ Resolution:
This field specifies the resolution of the encoder video output.
This choice does not affect the flat panel or CRT selections.
Options:
❐ 640 x 480
❐ 800 x 600 (default)
■ Scan Mode:
This field selects the scan mode of the encoder. In underscan
mode, the encoder displays pixels outside of the specified
resolution. In overscan mode, the encoder displays only the
pixels of the specified resolution. This choice does not affect
the flat panel selections.
Options:
❐ Underscan (default)
❐ Overscan
■ Standard:
This field allows you to define the video output standard of
the encoder. This choice does not affect the flat panel
selections.
Options:
❐ NTSC (default)
❐ PAL