Adding or modifying user accounts on Matrox 4Sight 47
Adding or modifying user accounts on
Matrox 4Sight
The factory-configured Windows NT Embedded installation
has the following pre-installed valid user account, which has
administrative rights:
To create user accounts on Matrox 4Sight, use the program
Usrmgr.exe, which is included in the Windows NT Embedded
operating system. This is the common program from which you
can add user accounts in a full version of Windows NT and has
the same functionality in Windows NT Embedded. From the
command prompt window, type Usrmgr and add user profiles
as you would under a full Windows NT operating system
environment.
Changing account
passwords
You can change the password of an account using Usrmgr.exe.
Alternatively, to change the password of the currently logged
account you can follow these steps:
1. Logon using the account.
2. Press Ctrl-Alt-Del. The Windows NT Security dialog box
is presented.
3. Click on the Change Password button. The Change
Password dialog box is presented.
4. Change the password and click on the Ok button. If you
don’t enter a password (that is, you press Enter instead of
entering a password), the Auto-logon feature cannot be
used. More explicitly, the Auto-logon feature requires that
you use a password with at least one character.
User name Password
Administrator Administrator
To Next Page
Loading...
