Advanced Configuration subscreen 157
Options:
❐ EPP 1.7 (default)
❐ EPP 1.9
❐ ECP (without EPP)
❐ ECP (with EPP)
❐ SPP Compatible
❐ SPP Extended
■ Parallel Port Address:
This field specifies the I/O address of the parallel port. Two
communication port addresses are available to accommodate
software utilities that use either the 378h or 278h address
exclusively. You will have to select the other address for the
parallel port.
Options:
❐ 278h
❐ 378h (default)
■ Selected Aux I/O IRQ:
This field specifies which of the interrupt line (IRQ) you can
assign to the auxiliary I/Os on the Matrox 4Sight.
Options:
❐ None (default)
❐ IRQ3
❐ IRQ4
❐ IRQ5
❐ IRQ7
❐ IRQ9
❐ IRQ10
❐ IRQ11
To Next Page
Loading...
