Max LM-550A2 Series User Manual

50
FUNCTIONS
4.
END.” And
then Press / key or Ten key to input the value of
the “END.”
5. Select print range by pressing
or .
Press ENTER .
Note: Make sure to set both the “START” number and the “END” number.
In the [PITCH PRINT MODE], you can set three series of “SEQUENCE” in one block
and up to 45 series of “SEQUENCE” in one document.
In the [NORMAL PRINT MODE], you can set only one series of “SEQUENCE” in one
document.
W
When sequence printing 2 or 3 prints per block, if the settings for number of prints in the
block is different, the smaller number is given priority and no more prints are made.
hen you change the [PITCH PRINT MODE] to the [NORM AL PRINT MODE], all the
“SEQUENCE” settings are automatically cancelled except for the first “SEQUENCE”
setting.
8-10 FRAME
Setting to frame a document.
This function allows you to surround the text with a frame.
LM-550A/PC
LM-550A/PC
1. Press SHIFT RPT (FRAME). The
[FRAME setting screen] appears.
2. Switch item by pressing
, , , or
. Press ENTER.
Note: PITCH PRINT MODE],” the “FRAME” is applied to each block.
In the [NORMAL PRINT MODE], the “FRAME” is applied to the whole document.
Selectable items: NO, STANDARD, CLOSE, WIDE
B
P
B
P
C L O S E
W I D E

Max LM-550A2 Series Specifications

General

Brand	Max
Model	LM-550A2 Series
Category	Label Maker
Language	English